How To Put Out A Chimney Fire

Download Article

Download Article

It's of import that you put out fires in your fireplace properly to avoid a hazard. Fortunately, 2 effective fire extinguishers, water and baking soda, are easy to detect at home. Too putting out the flames, y'all'll too demand to dispose of the hot ash left over from the fire. Past removing the ash properly and making sure the fire is completely out, y'all can enjoy your fireplace responsibly.

1. 1

   Fill a plastic spray canteen with water. Utilise a medium-size spray bottle every bit opposed to a loving cup or bucket to forestall splashing or excessive steam. Make sure in that location's plenty h2o inside the spray canteen to extinguish the burn down and dampen the firewood.

2. ii

   Spread the firewood and embers in the fireplace with a fire poker. Yous want the firewood and embers to be as open and flat as possible and so they cool faster.^[1]

   Advertisement

3. three

   Spray the fire with h2o using the spray canteen. Continue spraying until yous've covered all of the firewood and embers. You lot want everything to exist clammy so the wood and embers cool down and get out.^[ii]

4. 4

   Make sure the fire is out before you leave information technology unattended. In that location should be no flames or red, called-for embers. If the burn down restarts or the firewood and embers are still glowing hot, spray more than water onto the fire.

Advertizement

1. 1

   Use a fire poker to spread effectually the burning wood and embers. Effort to create a flat, even layer that you tin can easily cascade the baking soda over.^[3]

2. 2

   Scoop up some ash with a metal shovel and dump it over the firewood. Continue doing this until all of the flames are extinguished.^[four]

3. 3

   Pour blistering soda over the embers and firewood. Use whatever kind of store-bought baking soda; yous merely desire plenty of information technology to create a thin layer over the embers and wood. Baking soda contains sodium bicarbonate, which is too found in some fire extinguishers, and it will assist smother the fire so it doesn't restart.^[5]

   • Avoid using sand to smother a burn as it will exist difficult to make clean out of the fireplace.

4. iv

   Lookout the fireplace for a few minutes to make sure the burn doesn't restart. If the fire restarts, repeat the ash and blistering soda steps until the burn down is completely out.

Advertizing

1. ane

   Expect several hours later the burn'south been put out to remove the ashes. This will permit the ashes fourth dimension to cool downwards. Never attempt to remove the ashes when the fire is still going.^[6]

   • To give the ashes more time to cool downwardly, leave them in the fireplace overnight. It'southward OK to leave the ashes unattended while y'all sleep, as long every bit the fire is completely out (there are no flames or carmine embers).^[7]

2. ii

   Use a metal shovel to scoop up the ashes. Don't worry about getting out whatever leftover wood; you just desire to clear out the gray and black ash on the bottom of the fireplace.^[eight]

   • Remember that some embers may still be hot, even after the fire has been out for a while. Be careful when you're removing the ashes.

3. 3

   Dump the ash into a metal can. Never dump ash into a newspaper, cardboard, or plastic container. Hot embers in the ash could burn through the container and get-go a fire.^[9]

4. 4

   Take the tin filled with ash outside to a safe expanse. Keep the can abroad from flammable materials.^[ten]

Advertisement

Ask a Question

200 characters left

Include your e-mail address to get a message when this question is answered.

Submit

Advertizing

• Plan ahead by letting the fire die downward a couple hours before you program on leaving. Put out the fire early so you have time to make sure information technology'due south completely out before you leave it unattended.

Cheers for submitting a tip for review!

Advertizing

• Don't attempt to put out a fire in a fireplace by smothering information technology with an object. If the object is combustible, it could catch on fire and create a dangerous corporeality of smoke.

• Don't wait for a fire in a fireplace to go out on its ain. Hot embers in a fireplace can burn for several days and could cause another fire to beginning if they're left untended to.

• Never attempt to put out a fire past fanning it with an object or your easily. Fanning a fire will make it grow.

• If your fireplace fire gets too large or extends into your chimney and you're unable to put information technology out, call the fire department immediately.

Advertizement

Things You'll Need

• Plastic spray bottle
• Water
• Blistering soda
• Metal shovel
• Metal tin
• Heat resistant gloves

About This Article

Commodity Summary X

Information technology's of import to fully put out a fire in your fireplace so it doesn't reignite after yous've left the room. To put a fire out, get-go, spread the firewood and embers with a burn down poker and so they cool more than quickly. And then, spray the fire thoroughly with a spray bottle filled with water, which will produce less steam than pouring a bucket of water on the fire. Alternatively, you tin can pour blistering soda over the embers and firewood. Baking soda contains sodium bicarbonate, which is an ingredient found in some fire extinguishers. Before you leave the room, brand certain there are no flames or red embers left, which could start a burn down. To learn how to remove ashes from your fireplace, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 174,708 times.

Did this commodity assistance you lot?

Source: https://www.wikihow.com/Put-Out-a-Fire-in-a-Fireplace

Share this post